TPMS-201-D Tyre Pressure Monitoring System

Range of Products

MODEL: TPMS-201-D and TPMS-201-D-5
Tyre Pressure Monitoring Systems (TPMS)

General

The TPMS-201-D series of tyre monitors have been designed to simultaneously monitor tyre pressures and temperatures for all standard passenger vehicles or double axle (4 wheel) trailers.

They have the capability to set individual reference pressures for each tyre, ranging from a target cold inflation pressure of 26 to 66 psi, providing a degree of flexibility for a variety of different applications.

The 5 sensor kit (TPMS-201-D-5) is supplied with an extra sensor for a spare tyre. (Note: the system can only monitor 4 tyres at one time)

System Specifications

-	Monitor and Display pressure and temperature readings for all 4 tyres simultaneously
-	Display Tyre pressure (PSI) or Tyre Temperature (DegC)
-	Easy to read LCD display with white backlight
-	Tyre fault conditions clearly indicated
-	Weight 75g (2.65oz)
-	Operating Temperature: -20degC to +70DegC
-	Pressure Resolution: 0.1 PSI
-	Temperature Resolution: 1.0 DegC
-	Driver Alert on Low Pressure, High Pressure, High Temperature, and Fast Leak Detection
-	Baseline pressure can be set from 10psi to 73psi
-	Audio and visual driver alert prompts
-	12DC vehicle power source required. Unit supplied with Cigarette lighter style connector and alternate hard wired cable. (Extra batteries not required)
-	RF signal reception adaptable to all vehicle types. Unit supplied with coaxial wire antenna. System will work with metallised film tinted window.
-	Low power consumption (12ma typical, 20ma Max). Can be hard wired to battery and powered on constantly to monitor slow leaks while vehicle is parked.
-	Rear On/Off Switch
-	"Baseline Pressure Set" button to define reference tyre pressure for your vehicle. Once set all alerts will be based on tyre pressure changes varying from this reference value.
-	Individual baseline pressure programmable for each tyre.
-	Internationally patented ID module technology enables tyres to be easily rotated and/or replaced.
-	CE / FCC / E-Mark standards certification
-	12 Month Warranty

Sensors / Transmitter modules

-	State of the art technology utilising GE transducer/processor core.
-	Optimum vehicle cold tyre pressure range: 26psi to 66psi
-	Rugged design, silicon encapsulated technology protecting electronics from vibration, shock and moisture. Able to withstand the stresses imposed by off-road driving.
-	Pressure Accuracy of +/- 0.75PSI
-	Temperature Accuracy of +/- 2.0 DegC
-	Weight: 35g (1.25oz)
-	Operating Temperature: -40DegC to +125DegC
-	Operating Frequency: 433.93Mhz
-	Long range transmitter with external transmission antenna.
-	Integrated Lithium Battery with up to 10 years theoretical battery life (7 years typical) designed to outlast the life of the tyre, (depending on vehicle usage).
-	Designed to withstand dust, mud, snow and water crossings
-	Integrated temperature compensation for high accuracy measurements and compensation for tyre pressure drop due to low tyre temperature.
-	Integrated unit, including tyre valve stem and tyre valve. No additional mounting hardware required as sensor forms part of the tyre valve.
-	Adjustable pivot head to allow for accurate fit into different rim profiles
-	Low weight aluminium valve stem body with proprietary surface treatment to prevent oxidisation and corrosion.
-	Compatible with air and nitrogen gas
-	Only compatible with Tubeless tyres
-	Rim valve hole diameter: 11.3mm
-	Each Sensor/Transmitter is uniquely keyed to an ID module which plugs into the side of display unit. (replacement Sensor units are available and can easily be installed).
-	CE / FCC / E-Mark standards certification
-	12 Month Warranty